Mini Cooper Register
I made one a couple of years ago from 1mm, it works fine. I made a template & folded it in half to check it was symetrical. I used narrow foam double sided tape to stick it to the window & two small rubber buffers to stop the middle being able to touch the glass. Its be on the car for about 5 years works well!
Just wanting to make a plastic anti mist panel, how thick were they?
I have found some 1mm polycarbonate, is this too thick?
Was probably less than 1mm (or whatever that is in fractions of an inch) but who's going to notice…
Thanks guys, i'll give it a go.
You must be logged in to post a comment.
Vertical seam cover trims
Sykes Pickavant & MPI Mini, help needed please