As it left the factory

Back to As it left the factory...

ORIENTATION OF CONTROL BOX (12 replies)

John-B
2 years ago
John-B 2 years ago

What is the correct orientation for the control box as fitted to a MK2 'S' I have seen the box fitted with the spade connectors at the bottom also seen them on the side facing the front of the car.

John

spoon.450
2 years ago
spoon.450 2 years ago

Hi John, I'll have a look and get back to you.
Dave

evonaut
2 years ago
evonaut 2 years ago

in response to john-b's post, when we tried to fit the control box we discovered the same issue with one of the fixings floating across the recess. in an effort to eliminate a future problem we welded a plate over the recess to provide a proper fixing and sealed back to the control box. perhaps not standard but definitely an improvement on the somewhat improvised engine bay layout. as i mentioned in an earlier post with attached photo, i elected to mount the box terminals down following non definitive research….

Recent posts

Back to As it left the factory... Back to Forum